P7.62 SMD Indoor LED Display

Product Search: in

View large picture

Product Category: SMD Indoor LED Display

Send Inquiry Print this Page

Tel: 0086-755-33503180

Fax: 0086-755-33503179

Mob: 0086-13798572335

Email: manager@yuchip.com

Product Description:

P7.62 indoor led display is always choosen when clients budget is limited for indoor P6 LED Display. Indoor P7.62 LED Display is much lower cost compared to indoor P6 led screen, while resolution is also lower.

Indoor P7.62 Specification

Pixel LED	SMD 3528
Pixel Configuration	1R, 1PG, 1PB
Pixels Pitch(mm)	7.62
Pixel density(dots/m2)	17222
White Balance Brightness(cd/m2)	2000
Color temperature(K)	5000—9500(chose by user)
Brightness Adjusted	100 grade by software, or by Auto-optic induced.
View Angle	Horizontal: 140°；Vertical: 140°
Best viewing distance(m)	≥ 7.5
Communication distance (m)	Internet Wire≤100, fiber≥100
Screen work Method	Scan：1/8
LED driving method	Constant driving current
Gray Grades	4096 levels for each color
Display Color	16,777,216
Refresh Frequency (Hz)	≥600
Picture display method	Dot to dot display synchronized with PC monitor
Signal interface	DVI
Input signal	Video: PAL/NTSC Option: VGA , Video , DVD,TV, etc
Front/Rear IP Level	IP65 for front;IP54 for rear
Working temperature(℃)	-20～+60
Stored temperature (℃)	-30～+80
Operation humidity(RH)	0-95%
Display Lifetime(hours)	≥100,000
Maintenance	Rear side
Working Voltage	AC110 / AC220V±10% 47～63HZ
Out of controlled dot	≤3/10,000 Pixels

The few phots showed above is a Malaysia indoor P7.62 project ageing test in workshop. This indoor P7.62 led screen utilizes Asnchronous control sytem becasue customer put it on Customs between Malaysia and Singapore and no need change information timely.

Send Inquiry

Previous Product >> P6 SMD Indoor LED Display

Next Product >> P8 SMD Indoor LED Display