P10 DIP Outdoor Commercial LED Display


  • Pixel pitch: P10 (10 mm)

  • LED type: High-brightness DIP (DIP Screen)

  • Screen size: 3×2 m (≈300×200 pixels)

  • Mounting: Wall-mounted façade installation

  • Brightness: ≥8000 nits for direct-sun readability

  • Weatherproof: IP65 (front) for rain, dust and heat

  • Control: LAN / Wi-Fi / 4G remote publishing and scheduling

  • Use case: Digital out-of-home advertising (DOOH) in Italy


 

Why DIP for Outdoor Advertising
DIP LEDs excel in intense sunlight and harsh weather. Compared with general SMD options, a P10 DIP screen offers very high luminance, strong UV/heat tolerance and long service life—ideal for static and motion content on roadside façades.

Benefits for advertisers

  • Readable from mid-to-long viewing distances

  • Stable colors and high contrast in daylight

  • Daypart scheduling and fast creative swaps

 

Technical Specifications

  • Pixel pitch: 10 mm (P10)

  • Resolution (approx.): 300×200 px for 3×2 m

  • LED type: Outdoor DIP, high-brightness

  • Brightness: ≥8000 nits (auto-dimming supported)

  • Refresh rate: ≥3840 Hz (configurable by control system)

  • Ingress protection: IP65 front / IP54 rear (typical)

  • Viewing angle (typical DIP): ~110° (H) / ~60° (V)

  • Power input: AC 110/220 V, auto-range

  • Control options: LAN / Wi-Fi / 4G; remote publishing & monitoring

  • Operating temp: −20 °C ~ +50 °C (typical design range)

Notes: Values are typical and can be customized to local codes, wind loads and client specifications.

FAQ
Q1: Why choose DIP for a wall-mounted façade?
A: DIP offers very high brightness, strong heat/UV resistance and long life—ideal for direct-sun, long-hour outdoor operation.

Q2: What is the ideal viewing distance for 3×2 m P10?
A: Roughly 10–80 m depending on content size and street geometry; P10 balances cost and readability for roadside ads.

Q3: Can I update ads remotely?
A: Yes. Publish content over LAN/Wi-Fi/4G with scheduling, dayparting and device status monitoring.

Q4: Is front service available for façade installs?
A: Yes. Front-service modules enable quick maintenance without rear access.

Q5: How do you control nighttime brightness?
A: With ambient sensors and software caps; we can align settings to local regulations to avoid light pollution.

 

LED Module Parameter
Pixel pitch (mm)10
Pixel configuration1R1G1B
EncapsulationDIP346
Colors matches6:3:1
Module resolution (pixels)32 x 32
Module pixel1024
Module size (mm)320 x 320
LED Cabinet Specification
Cabinet size (mm)960 x 960 x 150
Cabinet resolution (pixels)96 x 96
Cabinet pixels (pixels)9216
Cabinet materialSteel
Cabinet weight (kg)50
LED Display Specification
Pixel density(pixel/m2)10000
Brightness(cd/m2)≥8000 (adjustable)
Brightness adjusted100 grade by software or by Auto-optic induced
View angleHorizontal 110°; Vertical 70°
Best viewing distance (m)≥8m
Communication distance (m)<100meter by Internet Cable(without Relay; Multimode fiber cable < 500m; Single-mode
fiber cable < 20km
Display work method1/4 Scan
LED driving methodConstant driving current
Color contrast ratio1800:1
Gray Grade16bit
Display Color439, 804, 651, 110
Refresh Frequency (Hz)≥600
Picture display methodIntellective control technology, test-itself technology, correct technology, Synchronization
Control
Input signalDVI (S-VIDEO, CVBS, DP, HDMI, VGA, PAL/NTSC, etc. through Video processor converting )
System operatingWINDOWS 98, WINDOWS 2000, WINDOWS XP,WINDOWS 7 etc.
Front/Rear IP LevelIP65
Working temperature (ºC)-20~+60
Stored temperature (ºC)-30~+80
Operation humidity (RH)0-95%
Display Lifetime (hours)10 years or more( natural environment) 100000 hours( ideal environment)
MaintenanceRear side
Working VoltageAC110 / AC220V±10% 47~63HZ
Power consumptionMax: 940W/㎡ ; Ave:400W/㎡
Out of controlled dot≤3/10,000 (Out of controlled dots means the pixels of which the brightness and the wave
length are both >10% depart to the normal one)

(P10 Outdoor Rental LED Display)

Scroll to Top
Discuss Your LED Display Project
  • Engineering Support
  • Typically Replies Within 24 Hours
Our team typically replies within 24 hours.
Planning an LED Display Project?
Discuss My Project
Engineering Support · 24-Hour Response