P2.5 LED Display

P2.5 LED Display is an excellent choice for an indoor display screen. It is among YUCHIP’s small pixel pitch series for indoor installation and perhaps a best-valued product for various indoor applications.

It is evident and highly appreciated in locations such as shopping malls, theaters, museums, conferences, exhibitions, hotels and restaurants, DJ booths, and a lot more.  Also, it has high consistency, high reliability, and can be customized for its size, flatness, adaptability (if you opt for a flexible one), and high brightness.

Creating and customizing your desired LED display for your project requires a professional, highly experienced team; in YUCHIP, we have trained and skilled individuals who will guide you along the way.


P2.5 LED Display is an indoor LED panel that often comes with module size 320mm x 160mm and 200mm x 168.75mm. A small pixel pitch gives viewers a refined experience every time. The vivid resolution is a result of a minimal distance between LED lamps.

With the P2.5 LED Display, the distance of LED lamps is 2.5mm, very close, making a transparent image, and the colors are accurate and adequate.

The LED Screen P2.5 is an indoor-type high-definition display that often comes with fixed installation or rental use. It is one of the most popular indoor displays; do you want to know why?

Advantages and Benefits

  • High Definition Resolution

The P2.5 LED Display has SMD1515 and a pixel density of 160000; the higher the pixel density, the better.  A high pixel density means better images, better texts, and overall satisfactory resolution for you.

  • Lightweight

The P2.5 LED Display only weighs 0.4 kg per piece, while a cabinet is around 9.5 kg, making installation and maintenance even more accessible and convenient.

One or two persons are enough to assemble the LED display for rental use, thus, saving the workforce.

  • Low Power Consumption

Unlike other HD displays, YUCHIP’s P2.5 Panel saves much electricity even though it has fine pixels and graphic shows. 

  • High-Quality Material

P2.5 LED Display utilizes die-casting aluminum as its raw material, making the whole display lighter but long-lasting. Also, the maintenance comes thru the front by the use of magnets or screwdrivers.

  • Various Control Method

Its easier to configure equipment if it adopts different video playback capabilities.

The P2.5 Panel case has 2KHD and 4KHD, resulting in a more vivid and transparent-like resolution. Besides a flat P2.5 panel, YUCHIP also provides a P2.5 flexible LED screen and a P2.5 LED display ball.

P2.5 LED Display Module Specification

Pixel Pitch (mm)


Pixel Configuration



3 in 1

Colors Matches


P2.5 LED Display Cabinet Specification

Cabinet Size (mm)

640 x 480

Cabinet Resolution (pixels)

256 x 192

Cabinet Pixels (pixels)


Cabinet Material

Die Casting Aluminum

Cabinet Weight (kg)


P2.5 LED Display Screen Specification

Pixel Density(pixel/m²)



600 – 800 Optional

Brightness Adjusted

256 grade by software or by Auto-optic induced

View Angle

Horizontal 140°; Vertical 140°

Best Viewing Distance (m)

≥ 2.5m

Communication Distance(m)

<100meter by Internet Cable(without Relay; Multimode fiber cable < 500m; Single-mode fiber cable < 20km

Display Work Method

1/32 Scan

LED Driving Method

Constant driving current

Color Contrast Ratio


Gray Grade


Display Color

439, 804, 651, 110

Refresh Frequency (Hz)

≥1920, ≥3840 Optional

Picture Display Method

Intellective control technology, test-itself technology, correct technology, Synchronization Control

Input Signal

DVI (S-VIDEO, CVBS, DP, HDMI, VGA, PAL/NTSC, etc. through Video processor converting)

System Operating


Control System

Novastar, Linsn, LEDvision, LEDset

Front/Rear IP Level


Working Temperature (ºc)


Stored Temperature (ºc)


Operation Humidity (RH)


Display Lifetime (hours)

10 years or more (natural environment)

100000 hours (ideal environment)


Rear / Front Side

Working Voltage

AC110 / AC220V±10% 47~63HZ

Power Consumption

Max: 700W/㎡ ; Ave:250W/㎡

Out Of Controlled Dot

≤3/10,000 (Out of controlled dots means the pixels of which the brightness and the wavelength are both >10% depart to the normal one)


(P2.5 Indoor HD Rental Video Wall LED Display)

Scroll to Top
Hi there, have a question?
Let us help, text here to start!